Scene

DAVID ROSE LIGHTING LTD

59 HIGH STREET, HAMPTON HILL, MIDDLESEX, TW12 1NH

TELEPHONE : (020) 8941 0022 - FAX : (020) 8941 9911

email sales : sales@david-rose-lighting.co.uk

SMART WIRELESS INTERNAL LIGHTING SYSTEM

SCENE MODE INFORMATION

When using the wireless switching remote or wall switch in the scene mode function is very easy. Both the remote and wall switch has four buttons marked 1-4. This allows you to have four scenes (see diagrams below). The idea behind scene setting is to allow you to have some or all lights set to predetermined light levels at a touch of a button. i.e. button 1 will be scene one and this could have all your lights linked via the relevant receivers paired to button 1, you save your required light level so when you walk into the room and press button 1 all your lights come to the level you previously set. You can still override the level by using the up & down dimming buttons.

The next scene you wish to have could be the ceiling and wall lights.

The next scene you wish to have could be the table and floor lamps.

The next scene you wish to have could be the ceiling, wall and table lamps.

NOTE: There are two types of receivers. Wall lights and ceiling lights must be used with ceiling receivers, floor lamps and table lamps must be used with floor receivers.

Each receiver is capable of switching 350w of both mains or low voltage load. You can have more wall lights paired as long as you do not exceed the loading. They can be wired to the same receiver (if possible) or have their own receiver that is set to the relevant button on the remote / wall switch.