Smart Wireless switching is designed to eliminate the need for switch lines in your house. The system work by pairing transmitters and receivers together over radio waves. The plate switch or remote control become transmitters and the ceiling or floor controllers become receivers. The switch plate or remote control has a range of 30 meters and the each ceiling or floor controller has a switching load or 350w mains or low voltage. To pair devices is easy, both the transmitter and receiver have to be on the same frequency and this is done by making sure they are switched to the same number. 
More than one receiver can be paired with each button on the transmitter.
The smart wireless system allows you to use a conventional dimming option or a scene option with dimmable capability.
The wall plate and remote control have four buttons number 1-4 and these switch on your lights to your dimmed preference (if in dimming mode) or your scenes (if in scene mode), an up & down button for additional dimming and a master button that turns all your lights on full or off.
NOTE: There are two types of receivers. Wall lights and ceiling lights must be used with ceiling receivers, floor lamps and table lamps must be used with floor receivers.
